Radiator not working properly | Gaining Plumbing Experience | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Discuss Radiator not working properly in the Gaining Plumbing Experience area at Plumbers Forums

S

Sam28

Hi Everyone

I recently had 2 new radiators installed in my house, one in the bedroom & one in the en-suite on the 2nd floor both with trv's (think thats what they are called) radiator in the bathroom works fine but the one in the bedroom begins to warm up then stops. Just wondering what might be the problem? Ive tried bleeding the faulty radiator but with no success.

Appreciate any help....
 
hopefully air lock, shut all other rads, dodgy rad should work fine.
then the "new" system will require balancing with the lockshield valves your installer should of done this, call him back
 

Similar plumbing topics

  • Question
Well done for sorting it. Waggling the trv pin...
Replies
7
Views
1K
TBSE is good practice! As long as flow is the Top.
Replies
3
Views
878
  • Question
Here is a photograph to peruse.
Replies
3
Views
707
1/4 turn black knob on both. open bleed screw...
Replies
7
Views
963
  • Question
No, I can try this, out of interest, what is...
Replies
2
Views
1K
Back
Top