Radiator vale & drain cock | Plumbing Jobs | The Job-board | Plumbers Forums
  • Welcome to PlumbersTalk.net

    Welcome to Plumbers' Talk | The new domain for UKPF / Plumbers Forums. Login with your existing details they should all work fine. Please checkout the PT Updates Forum

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

American Visitor?

Hey friend, we're detecting that you're an American visitor and want to thank you for coming to PlumbersTalk.net - Here is a link to the American Plumbing Forum. Though if you post in any other forum from your computer / phone it'll be marked with a little american flag so that other users can help from your neck of the woods. We hope this helps. And thanks once again.

Discuss Radiator vale & drain cock in the Plumbing Jobs | The Job-board area at Plumbers Forums

Status
Not open for further replies.

rocketmanbkk

Plumbers Arms member
Plumber
Messages
4,106
Hi Friends

I am going to move a radiator in my house, does it matter if the drain cock is on TRV or Lockshield end?

I see at Sscrewfix you can buy chrome one atached to the valve (it looks like a lockshield).

Thank you
Rocket
 
just get the lockshiled with the built in drain valve, but you can put a drain valve on any side doesnt matter
 
Last edited:
you can get lockshield valves with integrated drains like you have found, but i prefer to put drain in the pipework wherever possible.
 
they are not ideal for draining systems, but that's where a wet vac comes in handy :p
 
the built in drain ofs are next to useless for draining the system they are realy for drop systems where each rad needs a drain down point
 
thats why i much prefer putting drainoffs onto pipework wherever possible.
 
Status
Not open for further replies.

Similar plumbing topics

Thanks a lot, put lots more turns on + some...
Replies
6
Views
909
  • Question
Will be a 15-60 then prob ups2 Green lights ?
Replies
8
Views
933
  • Question
Here is a photograph to peruse.
Replies
3
Views
539
It is set to that, max output, CC3 at 6.5M...
Replies
19
Views
2K
https://www.plumbersforums.net/threads/problems...
Replies
6
Views
1K
Back
Top