Radiator Valve Caps Replacements | Plumbing Jobs | The Job-board | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Discuss Radiator Valve Caps Replacements in the Plumbing Jobs | The Job-board area at Plumbers Forums

Messages
51
Hi all,

I am looking for a place to buy Radiator Valve Caps.

Picture 1: Got 1 radiators with no caps
Picture 2: Got 4 radiators with this cap
Picture 3: Got 3 radiators with this cap
Picture 4: No cap but the pin is different size compared to picture 1

Picture 1, each pin is 15mm high and 6mm thick at the top
Picture 4, pin is 10mm high and 6mm thick at the top

On each radiator i also have a Drayton TRV4

I am just looking to replace each one so there is some uniformity, right now it's all over the place:eek:

Preferably chrome ones if possible, if not than white ones.

Any ideas?

All the best

Jay

View attachment Diagram.jpg
 
It’s very important to make sure rad valve caps are fitted, little people can fall small heads fit into corner between wall and rad. Brass head then penetrates child forehead ouch ! My surveyed friend fails rentals for letting if rad caps are missing for this reason. Rob Foster centralheatking
 
First 3 photos are of Peglers Terrier older type valves.
I actually have some spare used heads for them, lockshield and wheel head.
The forth valve is one of the standard cheap valves
You can also get sets of universal heads that might sort it.
 

Similar plumbing topics

T
  • Question
There's another similar thead going on this...
Replies
1
Views
1K
managed to undo it with jaw pliers, happy days.
Replies
4
Views
796
  • Question
Who said anything about heating the kitchen ...
Replies
3
Views
645
Used to get a blister pack , I think called...
Replies
5
Views
2K
Back
Top