K
kb76
Hi,
In situations of pump failure within a tanked rain water harvest system (below ground) is there a way of filling via mains supply temporally ie via a filling link. As it stands the tank can be filled via a hose pipe but this is really only helpful when the emergency mains water solenoid has failed and won't fill the holding tank.
I understand rain water harvesting requires a catagory 5 air gap between mains water and the tank and cannot be connected directly. Is there another way to tap into the fed supply after the pump from the mains without breaking the cat 5 rule?
Thanks
kevin
In situations of pump failure within a tanked rain water harvest system (below ground) is there a way of filling via mains supply temporally ie via a filling link. As it stands the tank can be filled via a hose pipe but this is really only helpful when the emergency mains water solenoid has failed and won't fill the holding tank.
I understand rain water harvesting requires a catagory 5 air gap between mains water and the tank and cannot be connected directly. Is there another way to tap into the fed supply after the pump from the mains without breaking the cat 5 rule?
Thanks
kevin