Rangemaster mono tap flex connector | Plumbing Jobs | The Job-board | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Rangemaster mono tap flex connector

Post thread
  • Thread starter muchtie
  • Start date
  • Replies 1
  • Views 3K

Discuss Rangemaster mono tap flex connector in the Plumbing Jobs | The Job-board area at Plumbers Forums

Status
Not open for further replies.
M

muchtie

I've got a rangemaster mono tap with no connectors. Struggling to get flexi connectors with 8mm fitting.
Any suggestions for suppliers either on web or central Scotland.

Thanks
 
Status
Not open for further replies.

Similar plumbing topics

K
  • Question
New mono mixer tap fitted, hot water flow is slow!
I’ve got exactly same problem. I have to put...
2
Replies
30
Views
4K
Be kind
Be kind
T
Can I use push fit type tap connectors on toilet fill valve
You could try a long flexi and make it a wider...
Replies
4
Views
808
Jerry
J
A
  • Question
How to convert a 15mm tap tail to a 3/8" fitting
Thanks to you all for your thoughts, much...
Replies
5
Views
1K
Adam Mada
A
dilligaf
  • Question
Can't Change Flexi Tails Grohe Bau Kitchen Mono Mixer Tap
I decided to change the tap in the end with a...
Replies
4
Views
4K
dilligaf
dilligaf
J
Can you fit flexi pan connector directly into clay soil pipe?
Providing there is a finned seal and the...
Replies
1
Views
2K
Deleted member 120897
D
Back
Top