Ravenheat White Star 24 T Fault

[Rizme]

Hi All

Been to a ravenheat combi boiler yesterday, nothing was happpening initially i.e. the pump would run but fan not moving a bit, no voltage coming on the fan, checked on PCB nothing there as well for fan, replaced PCB and the fan works now.
The boiler isn't firing at all, neither on heating or hot water. If demand for either is requested, the pump starts and so does the fan, the aps clicks but nothing after that. For e.g if hot water is turned on and turned off after 20 secs the fan keeps on running and it does the same for heating as well. I have to turn the boiler off and everytime to stop this.
Never worked on one of these before, any help would be much appreciated

Hope you All have a Great New Year.

 

[Dotty]

Hi Rizme,

Sorry, we cannot discuss this in open forum for the safety of have a go heroes attempting to repair their own boilers.

If you are gsr please send a pm to either Gas man or Redsaw who will then check you and then give you access to the gsr private forum.

Thank you.

 

[Rizme]

thanks for that croppie, will do that now. yes I am GSR.

 

[Plumb Ugly]

id check the **********

 

[lame plumber]

id check the *********QUOTE]

you might want to look at the previous posts before offering assistance on this one

 

[Billy Bob Bob]

how many times have we got to keep saying

This plumbing forum will not provide advice to anybody with regards to boiler repairs or any other form of gas plumbing without you first providing us with your Gas Safe Registration number in a thread - for very obvious reasons. If you're not qualified to touch gas, you should stay well clear of trying to!

Read more: Central Heating Forum