Re activating a small H/W stored system after 7 years dormant. | Plumbing Jobs | The Job-board | Plumbers Forums
  • Welcome to PlumbersTalk.net

    Welcome to Plumbers' Talk | The new domain for UKPF / Plumbers Forums. Login with your existing details they should all work fine. Please checkout the PT Updates Forum

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

American Visitor?

Hey friend, we're detecting that you're an American visitor and want to thank you for coming to PlumbersTalk.net - Here is a link to the American Plumbing Forum. Though if you post in any other forum from your computer / phone it'll be marked with a little american flag so that other users can help from your neck of the woods. We hope this helps. And thanks once again.

Discuss Re activating a small H/W stored system after 7 years dormant. in the Plumbing Jobs | The Job-board area at Plumbers Forums

Status
Not open for further replies.
Messages
21
A small H/W system with Imm Cylinder and two outlets to basin and sink - has been storing dormant
water for seven years in a void flat.
The idea is to now activate the H/W system in the Imm Heater cylinder and at the two outlets. (the shower is an elec unit).

Suggestions for a safe re-activation of the system.
 
after 7 years I would look to changing the cylinder at least. there's no knowing what nasties have bred in the past 7 years.
 
Status
Not open for further replies.

Similar plumbing topics

J
  • Question
I cannot see the photo's but from your...
Replies
3
Views
1K
  • Question
Yours is an old fotic cylinder, Thermal store...
Replies
1
Views
980
yes , the meter for the immersion heater. Not...
2
Replies
30
Views
6K
what pump is he fitting on the mains?
Replies
8
Views
3K
Thanks, I can see that is about 750 l/hr and...
Replies
7
Views
3K
Back
Top