Re: heated towel rail stopping working | UK Plumbers Forums | Plumbers Forums
  • Welcome to PlumbersTalk.net

    Welcome to Plumbers' Talk | The new domain for UKPF / Plumbers Forums. Login with your existing details they should all work fine. Please checkout the PT Updates Forum

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

American Visitor?

Hey friend, we're detecting that you're an American visitor and want to thank you for coming to PlumbersTalk.net - Here is a link to the American Plumbing Forum. Though if you post in any other forum from your computer / phone it'll be marked with a little american flag so that other users can help from your neck of the woods. We hope this helps. And thanks once again.

Discuss Re: heated towel rail stopping working in the UK Plumbers Forums area at Plumbers Forums

Messages
2
My towel rail is not electric but separate to central heating and has been working consistently but since the 2 port valve was replaced on Monday because the radiators were not working it has stopped working, if I go into the loft and press the flame button on and off it seems to come back to life but goes off again eventually. Any advice as to what I can do please?
 
That valve replacement seems to have affected your towel rail working... First off, check if the valve settings were correctly adjusted for your towel rail. If pressing the flame button temporarily fixes it, then chances are there could be an airlock or the valve isn't opening properly. Try bleeding your towel rail to remove any trapped air. If that doesn't work, you might need to get the valve checked or readjusted by a professional.
 
That valve replacement seems to have affected your towel rail working... First off, check if the valve settings were correctly adjusted for your towel rail. If pressing the flame button temporarily fixes it, then chances are there could be an airlock or the valve isn't opening properly. Try bleeding your towel rail to remove any trapped air. If that doesn't work, you might need to get the valve checked or readjusted by a professional.
That valve replacement seems to have affected your towel rail working... First off, check if the valve settings were correctly adjusted for your towel rail. If pressing the flame button temporarily fixes it, then chances are there could be an airlock or the valve isn't opening properly. Try bleeding your towel rail to remove any trapped air. If that doesn't work, you might need to get the valve checked or readjusted by a professional.
Thank you. So if I turn heating on that also seems to bring towel rail on even though they’re not on same valve.. it’s also started a small leak on red container that says something ‘clean’?
 

Similar plumbing topics

S
  • Question
Presumably you've tried 'power cycling' it, by...
Replies
2
Views
438
C
  • Question
I would say it sounds like a relay noise so...
Replies
1
Views
1K
  • Question
Correct that’s for expansion both should be...
Replies
3
Views
400
S
  • Question
Can you post a photo of said valves? I’m not...
Replies
1
Views
1K
Deleted member 120897
D
  • Question
Yes, when I did the heating system I did the...
Replies
2
Views
1K
Back
Top