rear piping boiler jigs

[buckley plumb]

glowworm and ideal do a rear piping jig and how the valves are set up on the boiler cone and nut they allow pipes to pe piped from both above and below together (eg htg pipes from circuit above and one below ) why don't Worcester and baxi do this wanted to fit a duotec hea but cant due to this no space to run them beside the boiler.does anyone know if you can get the flat faced fitting like on the end of the baxi 90 degree tails (would be something like a flat faced tap connector)

 

[gassafe]

Worcesters can be piped from above or below without any stand off jig!

 

[buckley plumb]

Worcesters can be piped from above or below without any stand off jig!

but can they be piped at top and bottom together like attached

 

[buckley plumb]

[SUP]just realised I could use Worcester if I made my own pipes for the rear[/SUP]

 

[GasmanxxxR1]

or bulid your own stand off bracket. plywood and some batten to create a false wall if you like, the just use tees to go up and down

 

[moogwai]

Worcester do a pre-piping kit fir the cdi's, to go behind the boiler saves a load of time.