REccommend me a Tap?!

[Mik]

Hello everybody,

I need some good recommendations for the following tap replacements:

Kitchen sink tap is currently a monobloc mixer (stainless steel sink) so am currently looking for a good s-steel replacement as I don't want to replace the whole sink just the tap


Also, how tricky would it be to replace the bathroom sink taps currently from a two hole shrouded head tap, to a two hole mixer tap - any recommendations for taps is also welcomed!


Regards

Mik

 

[Puddle]

Well take your pick,as long as you pay over £60 should be ok,do not pay these £38 kitchen mixers off e bay,fall apart within 6 months,would recommend Bristan

As for basin ,do not think you can get a two hole mixer tap,as no standard size basin hole measurement,have seen old ones,think they were made by ideal who made basin and taps,but may be wrong,you could put mono block on one side of basin and black other remaining hole,if you wanted to save on replacing basin

 

[Mik]

Well take your pick,as long as you pay over £60 should be ok,do not pay these £38 kitchen mixers off e bay,fall apart within 6 months,would recommend Bristan

As for basin ,do not think you can get a two hole mixer tap,as no standard size basin hole measurement,have seen old ones,think they were made by ideal who made basin and taps,but may be wrong,you could put mono block on one side of basin and black other remaining hole,if you wanted to save on replacing basin

Thanks for that, Bristan seem reliable to me so will go with them!

Regards

Mik

 

[WHPES]

Stick with separate taps and mix your water in the basin! Mono on one side looks crap