Reducing tee from mdpe 20/25 to copper 15...

[WaterTight]

Can't find one online. Do they exist? Otherwise going to have to buy a hole roll of mdpe pipe just for a few inches to go between an equal tee and then a reducing coupler.

Thanks

 

[WaterTight]

Ah nevermind, found one with a 3/4" thread. That'll diddly-do it.

 

[ShaunCorbs]

You can get plasson adapters that replace the existing insert eg if you want a 15mm into a 25mm tee you will just need the tee and the 15mm adapter