Regin 45 U-gauge repairs? | Air Sourced Heat Pumps | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

  • Thread starter Sam Patching
  • Start date
  • Replies 10
  • Views 5K

Discuss Regin 45 U-gauge repairs? in the Air Sourced Heat Pumps area at Plumbers Forums

Status
Not open for further replies.
S

Sam Patching

Hi, Have just noticed my trusty Regin Premier 45 U-gauge is leaking but I can for the life of me find anywhere online that sells spare bits. Does anyone know of an online stockist for spare o-rings or rebuild kits as I dont think this warrents replacement yet.

U35.preview.jpg

Cheers :stooge_curly:
 
Last edited by a moderator:
Are these ones any good? I have an anton digital one at the moment and its due for calibration but I cant get it calibrated so I am currentley looking at new ones but still leaning towards a digital one
 
Are these ones any good? I have an anton digital one at the moment and its due for calibration but I cant get it calibrated so I am currentley looking at new ones but still leaning towards a digital one

It's a good piece of kit. No calibration required,no batteries to change.I've had mine for 10 years now.Very pleased with it.
 
Thanks CMairiD :) And Villa Tom, I would not use anything else these days, they are easy to read, rarely lose their fluid because of inbuilt traps and are easily adjusted using a screw at the bottom. Only downside I can see is that the fluid is expensive for what it is & cant be filled wit anything else.
 
Just looked online and these are only fifty quid. I think I may have to but one as my next one as I have been looking at buying another anton and they are far more expensive
 
Status
Not open for further replies.

Similar plumbing topics

It doesn’t sound like you’ve had the best...
Replies
8
Views
3K
M
  • Locked
  • Question
yes they have fitted a number of them now...
Replies
17
Views
372
Back
Top