regin ratio one click flue gas analyser

[sav]

any one seen or used one yet heres a link to the web site

[DLMURL="http://www.reginproducts.co.uk/gasdetection/REGXA1"]REGXA1 - One-Click Ratio Analyser Kit | Regin[/DLMURL]

thinking of getting one as i need an analyser or any one got any idears on a good one?

 

[stevetheplumber]

any one seen or used one yet heres a link to the web site

[DLMURL="http://www.reginproducts.co.uk/gasdetection/REGXA1"]REGXA1 - One-Click Ratio Analyser Kit | Regin[/DLMURL]

thinking of getting one as i need an analyser or any one got any idears on a good one?

ive got a brand new tpi with printer for 300 quid on ebay at the moment
TPI FLUE GAS RATIO METER WITH PRINTER AND RUBBER BOOT on eBay (end time 13-Dec-09 19:33:43 GMT)

 

[sav]

ive got a brand new tpi with printer for 300 quid on ebay at the moment
TPI FLUE GAS RATIO METER WITH PRINTER AND RUBBER BOOT on eBay (end time 13-Dec-09 19:33:43 GMT)

hi looks good what model is it?

 

[stevetheplumber]

hi looks good what model is it?

tpi 709

 

[princeknight]

depending on how much you wanna spend. i got a kane 425 and a 450. never let me down. but looking at £650+ vat. get heat clamps, gas sniffer, heat probe, flue probe as standard in kit. very easy piece of kit to use, user friendly no pressing buttons to swop / change menus. simple turn dial.

 

[sav]

ok but is the regin one any good?

 

[sav]

i take it then no one has used one yet ha ha ha

 

[princeknight]

i think most engineers have the anton v2 or the kane machines.

 

[the_ace]

I was looking at these regin ones too but thinking of going with the anton as it seems to the most popular so should be easier to get spares for etc.

 

[villa_tom]

Got an anton sprint V2 and TPI. The TPI wins hands down. Purges loads quicker and alot easier to use.

 

[barney48]

I have a regin which developed a fault after about 4 uses. Regin themselves are abysmal with their after sales service so I suggest everyone thinking about getting one of these thinks again. They are a basic machine for a basic price and as I am semi-retired and dont use it more than a few times a month it seemed a good deal but now I wish I had paid extra for another make. I had a Kane800 with printer but the recalibration cost with the oxygen sensor was £245 so it seemed a better idea to spend £270 for a new machine with a 5 year sensor life.

 

[royston]

Just bought a kane 455 cpa1 kit today, so we shall see how it goes, should receive this week.

 

[Billy Bob Bob]

anton sprint v2 for me best fga i have owned will post up the costs they give me a costing sheet which i need to dig out

 

[Bigjimknickers]

First off hello all,
I was in CHS the other day near camberly & saw this for sale, the regin one click analyser, i figured it must be very basic but for the people like myself who dont use them daily it seems very tempting, i know this is an old thread so has anyone had any good experiences with it?

 

[AWheating]

i think the regin is made by kane..... well thats what i had heard.

 

[REDSAW]

[DLMURL="http://www.reginproducts.co.uk/gasdetection/REGXA455"]REGXA455 - Ulti-mate Analyser | Regin[/DLMURL]
is this the kane 455 and is it cheaper?.

 

[AWheating]

looks the same, it would depend on calibration charges and warranty periods i guess.