Relining the ?silicone? around a shower pan | Showers and Wetrooms Advice | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Discuss Relining the ?silicone? around a shower pan in the Showers and Wetrooms Advice area at Plumbers Forums

Messages
42
Hi,

I have a shower cubicle which has what looks like a silicone border (marked in black in photo A) that separates the tiles from the shower pan.

This is wearing out and is starting to get gaps in it.

I bought a basic silicone sealant, but I am not sure if this is the right tool for the job? The current silicone border is approx 2cm in height and 50mm depth - see photo B - and it has a very spongey feel to it. I am not sure if a new silicone sealer is the right thing to put in.

If so, would I just rip this border out and use the silicone sealant around the base?

Many thanks for your help,
Alex

A.jpgB.jpg20131010_155450.jpg20131015_151329.jpg
 
Hi,

I have a shower cubicle which has what looks like a silicone border (marked in black in photo A) that separates the tiles from the shower pan.

This is wearing out and is starting to get gaps in it.

I bought a basic silicone sealant, but I am not sure if this is the right tool for the job? The current silicone border is approx 2cm in height and 50mm depth - see photo B - and it has a very spongey feel to it. I am not sure if a new silicone sealer is the right thing to put in.

If so, would I just rip this border out and use the silicone sealant around the base?

Many thanks for your help,
Alex

View attachment 15273View attachment 15274View attachment 15275View attachment 15276


What you have there is normal (bog standard) silicone sealant.
What may have happened: the tiler hasn't taken the tiles all the way down to the shower pan height or, an older higher shower pan was originally there.
Hence the 2 cm height differential.
If you do not have the correct silicone shapers, one could use the back of a table spoon or tea spoon to profile the correct height:spitting on the back of the aforementioned spoons helps to produce a nice non stick finish.
Use Gorilla wipes to clean up, best thing since sliced bread, but do not try sliced bread to clear silicone up.
 
Upvote 0

Similar plumbing topics

  • Question
Ah.. i see. yes very odd and at this point...
Replies
6
Views
1K
  • Question
Post a picture please let's see what you've...
Replies
2
Views
2K
  • Question
Sure - here are some more but let me know if...
Replies
6
Views
3K
  • Question
Chances are lifting it / removing it could...
Replies
9
Views
4K
  • Question
Hi, I'm new to the site and am hoping someone...
Replies
0
Views
1K
Back
Top