Remeha Boiler Problem | Boilers | Plumbers Forums
  • Welcome to PlumbersTalk.net

    Welcome to Plumbers' Talk | The new domain for UKPF / Plumbers Forums. Login with your existing details they should all work fine. Please checkout the PT Updates Forum

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

American Visitor?

Hey friend, we're detecting that you're an American visitor and want to thank you for coming to PlumbersTalk.net - Here is a link to the American Plumbing Forum. Though if you post in any other forum from your computer / phone it'll be marked with a little american flag so that other users can help from your neck of the woods. We hope this helps. And thanks once again.

Discuss Remeha Boiler Problem in the Boilers area at Plumbers Forums

Status
Not open for further replies.
B

bajers

Hi Guys,

Wonder if you can help.

Just had my 2 year old Remeha boiler serviced by the original installer and ever since the service I have been getting a 'whoomp' from the boiler as it ignites. Not enough to shake the casing but enough to hear it 1 room away.

I am assuming that the gas is flowing a second or so before the igniter flashes up and am getting a bit of an explosion in the boiler.

The installer has been back to have a look and tweaked it and improved it slightly but not cured the problem completly.

Question is, am I being picky to get him back again? Is this noise normal and is it doing the boiler any long term damage?

I don't want to get the installer back unecessarily, but at the same time, I don't want to knacker my boiler up.

Any advice, much appreciated.

Thanks.

Barry.
 
I would ring Remeha direct, I think they have a 3 year warranty on labour and 5 on parts (I think)
 
Edit; forgot this was the ch forum rather than the GSR forum.

In short, get installer, or someone who knows these appliances round
 
Last edited:
Status
Not open for further replies.

Similar plumbing topics

Hi, thanks for the reply, that did cross my...
Replies
2
Views
821
Unfortunately the fitting of a new Venturi did...
Replies
3
Views
554
Hello All. The pump was disconnected and...
Replies
10
Views
1K
This response doesn't make any sense, as the...
Replies
23
Views
2K
W
pcb issue so gas safe engy required sorry to say
Replies
1
Views
710
Back
Top