Remeha Boilers | Boilers | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

American Visitor?

Hey friend, we're detecting that you're an American visitor and want to thank you for coming to PlumbersTalk.net - Here is a link to the American Plumbing Forum. Though if you post in any other forum from your computer / phone it'll be marked with a little american flag so that other users can help from your neck of the woods. We hope this helps. And thanks once again.

Discuss Remeha Boilers in the Boilers area at Plumbers Forums

Status
Not open for further replies.
W

wetwipe

I'm preparing to replace our ageing Myson boiler, and having been put on to Remeha Boilers by a member of this forum, my internet research has been fruitful, and I've been very impressed by the simplicity of the internals, the s/s heat exchanger, the 5 year warranty, the price and comments on excellent reliability. However, hardly anyone seems to install them, and when I found an installer, he phoned back the next day to say he has issues with Remeha boilers and that I should install Worcester Bosch. He wouldn't go into detail in order to protect himself, but said it was installation related not quality of product or reliability. Any clues anyone?
 
I like Frisquet boilers my self, but then I am not in the UK, but I believe that they do have a sales outlet in the UK, they are all copper body and heat exchanger with a stainless steel cylinder if wanted, 80 or 120 litres in capacity with 20 or 24 litres a minute supply with a 40°c temperature rise
 
I'm preparing to replace our ageing Myson boiler, and having been put on to Remeha Boilers by a member of this forum, my internet research has been fruitful, and I've been very impressed by the simplicity of the internals, the s/s heat exchanger, the 5 year warranty, the price and comments on excellent reliability. However, hardly anyone seems to install them, and when I found an installer, he phoned back the next day to say he has issues with Remeha boilers and that I should install Worcester Bosch. He wouldn't go into detail in order to protect himself, but said it was installation related not quality of product or reliability. Any clues anyone?


Dont know where hes coming from, I have more problems installing worcesters than any of the remehas Ive installed. The only time I had an issue with either boiler both companies responded equally quickly and resolved the problems. If the installer has an issue he should let you know what it is in my mind after all its only his opinion and whos going to chase him up? Ifyour near me Id be hapy to oblige drop us a pm
 
when I found an installer, he phoned back the next day to say he has issues with Remeha boilers and that I should install Worcester Bosch. He wouldn't go into detail in order to protect himself, but said it was installation related not quality of product or reliability.
Can't see what installation problems he could have had. I was at my son's house when he had a Remeha heat only installed and it went like clockwork.
First day: Man 1 removes old back boiler and extend pipes up into airing cupboard above (There was an existing duct). Man 2 hangs Remeha on the wall and starts to install the flue. That was a bit tricky as the F/E tank was right above the boiler, but a couple of bends moved the flue to one side. Condensate pump installed to pump up into loft and across to the stack pipe (The alternative was a pipe running along the bedroom skirting which would have looked ugly.)

Second day: Sparks connects up boiler to existing controls. (Had a bit of problem with the condensate pump but Remeha held his hand over the phone.) Boiler then commissioned. The only problem I can see is that the boiler can have many different control systems - the Wiring manual shows 26 different diagrams. Also Remeha expect the installer to carry out combustion checks, so he will need a flue gas analyser, which takes time to get the settings right.

As for finding the name of an installer, give Remeha a ring 0118 9783 434. They don't hold details of installers (or didn't when I last asked) but they will tell you who are the stockists in your area. You can then ask them who has installed Remehas and how many.
 
the issue you have is not the boiler, but your installer - you need your local installer to be happy as well, he is gonna be the one installing it and looking after it year after year, so it needs to be a boiler that he is happy with and hopefully has access to immediate spare parts.
As for the boiler, my company installs the Remeha range, because that is our preference for reasons of costs, ease of install, lack of callbacks, stock of (un-used) spares, every plumber has their preferences for the above reasons.
worcester bosch is a good brand name boiler.
read some more on the internet, look through some more posts here, and then find a local plumber happy to install your choice of boiler.
all of the above is my own view and not that of the forum.
 
definately down to the plumber not experienced in the remeha.

the worcestor is a plug and play type boiler pre commisioned in factory no need for ***bustion checks and theyre easy to work on as there are so many hence more experience.

a decent installer will install a remeha as they are good boilers.

if you were going for a glow worm then i would suggest a re think - if you were going for remeha i would quite happily go along with your choice as an installer

good luck
 
Status
Not open for further replies.

Similar plumbing topics

I took @Chuck to mean: A reputable...
Replies
5
Views
1K
Stick with heat only. You most probably still...
Replies
3
Views
962
Thanks All. After much persuasion the...
Replies
5
Views
466
Thank you for the detailed and considered...
Replies
14
Views
1K
hello, old post but what did you go with in...
Replies
11
Views
7K
Deleted member 131795
D
Back
Top