Remote Switch for Motorised Valve?

[Stanios]

Hi all,

Got a customer with an unvented which the installer didnt bother to wire in the 2 port valve so its been like this for years just manually open.

Problem is the valve is on the other side of the house where wiring centre is, running cable is major work. I was wondering if anyone knows of any wireless switch that will simply send signal to receiver by the wiring centre whenever motorised valve actuates off the cylinder stat.

Cheers

 

[muggles]

RF Mainslink

 

[townfanjon]

Pretty sure Delta Dore do one .

 

[leesparkykent]

Yeah RF mains link.

 

[ShaunCorbs]

Cant you wire it up to the cylinder stat, and find power somewhere

I know not the best but will work and be safe

 

[ShaunCorbs]

can you explain why the disagree lee

 

[stani]

2 different sources into 1 unit, could cause problems with borrowed neutral if it's RCD protected. Not the best,

 

[ShaunCorbs]

2 different sources into 1 unit, could cause problems with borrowed neutral if it's RCD protected. Not the best,

Depends if the cylinders been wired in at all , if it's not won't be 2 different sources

And your still going to have to find power if there's no cable to the stat/ cylinde, even with the mains link

 

[stani]

I thought you meant the wiring from boiler to stat,

 

[ShaunCorbs]

I thought you meant the wiring from boiler to stat,

No have it independent of that and just put the time on for an hour or two

 

[leesparkykent]

can you explain why the disagree lee

because I have fat fingers and agree and disagree are next to each other....

 

[ShaunCorbs]

because I have fat fingers and agree and disagree are next to each other..

have the same problem but with replying and the creative emoji

 

[Stanios]

RFSolutions looks like what I am after, cheers guys.
Though for 100 quid you can get a decent wiress thermostat makes you wonder what margin those guys are putting on their gear..
Pulls me out of a tight spot anyway cheers!