Removal Of Shower Enclosure | Showers and Wetrooms Advice | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Discuss Removal Of Shower Enclosure in the Showers and Wetrooms Advice area at Plumbers Forums

K

karentreefrog

We are having problems removing a shower enclosure, we are unsure of the make and despite the doors coming off easily we are struggling with the side panels, we have already removed the screws top and bottom but the panels still aren't coming out is there a guide rail or something we are missing, we put the enclosure in about 11 years ago but have a leak so are removing the mosaic tiles and replacing with larger tiles. I have attached some photos.
Any ideas anyone.

Many Thanks Karen

:hair2: DSCN1528.jpgDSCN1527.jpgDSCN1526.jpgDSCN1525.jpgDSCN1524.jpg
 
Take the screws out of the wall profile if you haven't, cut the silicone where the bottom rail meets the tray and it should move. The enclosure will come out as one and leave the wall profiles in place.
 
Upvote 0
I didn't even see yours before I started writing Steve, I agree though lol

I always seem to get it wrong when complimenting the wife and it gets taken the wrong way and ends up offending her instead
 
Upvote 0
We are having problems removing a shower enclosure, we are unsure of the make and despite the doors coming off easily we are struggling with the side panels, we have already removed the screws top and bottom but the panels still aren't coming out is there a guide rail or something we are missing, we put the enclosure in about 11 years ago but have a leak so are removing the mosaic tiles and replacing with larger tiles. I have attached some photos.
Any ideas anyone.

Many Thanks Karen

:hair2:View attachment 8467View attachment 8468View attachment 8469View attachment 8470View attachment 8471
Thanks all for your response I will let you know how we get on.
 
Upvote 0

Similar plumbing topics

    • Like
  • Question
Corner profiles are the devil
Replies
3
Views
1K
  • Question
Many thanks Ben-gee. I have done the above and...
Replies
3
Views
1K
  • Question
Thanks very much Ben gee, ill take a look at...
Replies
2
Views
2K
  • Question
There are loads of enclosures available that...
Replies
4
Views
2K
  • Question
As an update, what I did was: Applied a blob...
Replies
4
Views
891
Back
Top