Removing Cistern from Bowl. | UK Plumbers Forums | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Discuss Removing Cistern from Bowl. in the UK Plumbers Forums area at Plumbers Forums

Messages
1
Hello.
Trying to remove cistern from bowl, however, nuts are rusted and one in particular is difficult to get to due to other pipework.
I have applied rust remover and lubricant. Any other advise greatly appreciated.
Carried out a temporary repair to waste pipe leak, now requires a more permanent solution.
Regards
Kathryn
 

Various types widely available, makes it much more comfortable than tape / gloves.

Personally I like this:


I thought it was a gimmick but the blade is much more rigid than a hacksaw blade so much more useful.
 
Hello.
Trying to remove cistern from bowl, however, nuts are rusted and one in particular is difficult to get to due to other pipework.
I have applied rust remover and lubricant. Any other advise greatly appreciated.
Carried out a temporary repair to waste pipe leak, now requires a more permanent solution.
Regards
Kathryn
depending on flushing type. If overflows built in type overflow and removable flush valve.. try getting a steel drill bit and drill through center of bolt from inside the cistern to weaken bolt a bit
 

Similar plumbing topics

  • Question
If you are capping off something temporarily...
Replies
2
Views
403
  • Question
thanks for the feedback, yes all new pipework...
Replies
8
Views
3K
  • Question
Wow yeah - I think this will be my first...
Replies
9
Views
1K
  • Question
(Just bumping a few older threads, they will...
Replies
7
Views
3K
B
Sometimes you have to think outside the box...
Replies
7
Views
2K
Back
Top