Repairing old fashioned tap | Air Sourced Heat Pumps | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

  • Thread starter Ianscaz
  • Start date
  • Replies 3
  • Views 739

Discuss Repairing old fashioned tap in the Air Sourced Heat Pumps area at Plumbers Forums

Status
Not open for further replies.
I

Ianscaz

Hi all, bit of home plumbing advice please. The leaky tap shown in the photo is proving to be a bit of a sod. I assumed that the caps on the top would simply pop off but they don't. I'm at a loss as to how to dismantle this tap. IMG_0737.jpg
 
I would expect either:

a. top "gold" cap to unscrew or pop off, revealing screw.
OR
b. "gold" piece at end of handles to pop off or unscrew.
OR
c. handles to unscrew revealing a grub screw.
 
Status
Not open for further replies.

Similar plumbing topics

  • Question
You may find some orings that you can replace...
Replies
3
Views
4K
  • Question
Thanks for everyones help with this. I did...
Replies
9
Views
743
  • Question
Hi, there is no grub screw. I have attached...
Replies
6
Views
425
  • Question
I'd also guess that the outer plastic is...
Replies
2
Views
2K
  • Question
Much easier than that is to replace your bath...
Replies
3
Views
2K
Back
Top