REPLACEMENT BLENDING VALVE

[FRAM777]

I need to replace a 3/4 or 22mm blending valve on a Telford Trident electric hot water boiler. see attached picture of the original part.

Telford asked me 100£ for the part and refused to provide the technical details. I am pretty confident this is not a proprietary part and similar parts from leading brands cost 20-40£

Do you have any suggestion to track the right part?

 

[ShaunCorbs]

Is it bad / why does it need changing and it will be around the £50 for the part

Google bulldog 22mm tmv3

 

[FRAM777]

Is it bad / why does it need changing and it will be around the £50 for the part

Google bulldog 22mm tmv3

the valve must be stuck, I only get warm water at the taps even if the water from the boiler is very hot. It is 20 years old.

 

[FRAM777]

something like these? I suppose they all work the same way? my original is not adjustable at 51C but I prefer if it is adjustable!

Thank you so much

 

[ShaunCorbs]

I would go with the right one new if you could or if your happy buying second hand that’s fine

Peglar is a good brand wouldn’t go for the tool station one as never heard of them