Replacement boiler

[Dave1983]

Hi all.
Was called to a property today that is going to be rented out in the next couple of weeks. They want me to replace the combi that was there ! The previous tentant's were evicted and ripped the old combi off the wall ! I couldn't believe it was its been made safe by someone else. The problem is that I'm not sure what size the old combi was ? The property has three bedrooms, bathroom with mixer shower, two living rooms, kitchen and Conservatory. Total of 8 rads. The customer wants a Worcester which is fine but would a 24i junior be enough or shall I go bigger ? Cheers Dave

 

[julesverne]

Are you GSR?

 

[mfgs]

Sizing a boiler for a house is pretty basic if you are in the trade.

 

[plumber0808]

Are you newly qualified? If so give your gsr number and people will happily give you guidance.

as said basic stuff, what we don't want is someone not qualified to fit a boiler mainly because we pay for the privilege and in unsafe to do so.

 

[Dotty]

You need a gsr in to look at your boiler. We cannot and will not give advice on the installation or repair of boilers for your own safety.

Please go to Gas Safe Register | Ensure your gas engineer is registered. or post a thread in the 'I'm looking for a plumber / gas engineer' section of these forums remembering to include your location. [DLMURL="http://www.ukplumbersforums.co.uk/im-looking-plumber-gas-engineer/"]I'm looking for a Plumber or Gas Engineer[/DLMURL]

If you are gsr please increase your post count to 10+ then send a pm to either Gas man or Redsaw who will then check you and then give you access to the gsr private forum.

Thank you.

http://www.ukplumbersforums.co.uk/central-heating-forum/42241-notice-gas-safety-related-advice.html