Replacement Grohe mono block | Plumbing Jobs | The Job-board | Plumbers Forums
  • Welcome to PlumbersTalk.net

    Welcome to Plumbers' Talk | The new domain for UKPF / Plumbers Forums. Login with your existing details they should all work fine. Please checkout the PT Updates Forum

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

American Visitor?

Hey friend, we're detecting that you're an American visitor and want to thank you for coming to PlumbersTalk.net - Here is a link to the American Plumbing Forum. Though if you post in any other forum from your computer / phone it'll be marked with a little american flag so that other users can help from your neck of the woods. We hope this helps. And thanks once again.

Discuss Replacement Grohe mono block in the Plumbing Jobs | The Job-board area at Plumbers Forums

Messages
3
How can i buy an exact replacement as i cannot see how to open the barrel to the hot ceramic disc to replace that?

Grohe
About 8 years old.

Thanks
Chris

20190531_131058.jpg


20190531_203413.jpg
 
Doh.
I pulled, pushed then I twisted the handles and looks like I have broken the cold tap as it now spins right round and still the blessed thing is closed tight.
Time to see if I can fit a new tap.
The problem is that I have very little access and wanted to fix what I had.
 

Similar plumbing topics

  • Question
If you search online for the manual of your...
Replies
1
Views
529
    • Like
Thanks for your post, can anyone offer any advice?
Replies
1
Views
376
  • Question
That fitting goes onto 15mm pipe. Not what I...
Replies
4
Views
1K
  • Question
I’ve got exactly same problem. I have to put...
Replies
30
Views
4K
A
  • Question
Thanks to you all for your thoughts, much...
Replies
5
Views
1K
Back
Top