Replacing a Honeywell T40 thermostat with a Honeywell DT90e | Central Heating Forum | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Discuss Replacing a Honeywell T40 thermostat with a Honeywell DT90e in the Central Heating Forum area at Plumbers Forums

Messages
2
Hi
I'm replacing my old dial thermostat with a digital
The wires going in from left to right are
Earth
Blue
2x Black
Brown

When electrically tested none are live with thermostat off

Research on this and other sites suggest
2x Black into B
Brown into A
Tie off and isolate Green/Yellow and Blue

1652541212907.png



Is this correct?
My hesitation is the fact that I have 2x Black and not one

Many thanks
 
Make safe neutral eg blue, make safe earth eg green and yellow

1 from old into a on new
3 from old into b on new
 

Similar plumbing topics

Replies
0
Views
2K
    • Like
Great summary and well done for getting it...
Replies
1
Views
2K
C
Leave it on constant and control it via a...
Replies
2
Views
2K
Back
Top