Replacing bath taps question

[Steve weightman]

A new set of taps they said yes I said booked in at 4pm lol. Just before I start to smash my hands to bits with getting them out what's with these tap connectors do they screw off if so do they need fibre washers when I eventually get them off
Thanks

 

[heliotrope]

They are end feed soldered FIs.
Need to be cut off and replaced with tap connectors or DIY flexies .

 

[Steve weightman]

They are end feed soldered FIs.
Need to be cut off and replaced with tap connectors or DIY flexies .
[/QUOT

They are end feed soldered FIs.
Need to be cut off and replaced with tap connectors or DIY flexies .

I'd have been a while with a basin wrench on them... I'll go for 3/4 x 22mm end feed reducers up to tap connectors
Cheers fella

 

[snowhead]

Looking at the age of that, it could be 3/4" copper, just so you're prepared.

 

[ShaunCorbs]

I would allow a day to change them

 

[Steve weightman]

I would allow a day to change them

No chance at 4 o'clock doing them gonna I've them plenty of torch and a thwack

 

[Jim Goodenough]

Any update Steve, you still there??

 

[Steve weightman]

Any update Steve, you still there??

No way.. I thought it but soon put the panel back I'd rather keep my knuckles intact this side of Christmas...I'm back to it in the new year