Replacing ch diaphragm on Baxi 105E

[paul_cragg]

Hi
I have just bought the kit to replace the CH diaphragm as the pin is not going all the way back. When I look to get in to do it there is no space to get spanner’s, screwdrivers in etc. It is all blocked by the DHW diverter, pipes and wires.

Any advise on how best to get access?

many thanks
Paul

 

[Aquarius]

Never done one, but plenty of YouTube videos.

 

[ShaunCorbs]

Have to remove the whole diverter

 

[Gasmk1]

You need to know what you are doing as it’s easy to get water onto the pcb causing a big headache