replacing duo tec with either potterton gold or main eco | Plumbing Jobs | The Job-board | Plumbers Forums
  • Welcome to PlumbersTalk.net

    Welcome to Plumbers' Talk | The new domain for UKPF / Plumbers Forums. Login with your existing details they should all work fine. Please checkout the PT Updates Forum

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

American Visitor?

Hey friend, we're detecting that you're an American visitor and want to thank you for coming to PlumbersTalk.net - Here is a link to the American Plumbing Forum. Though if you post in any other forum from your computer / phone it'll be marked with a little american flag so that other users can help from your neck of the woods. We hope this helps. And thanks once again.

Discuss replacing duo tec with either potterton gold or main eco in the Plumbing Jobs | The Job-board area at Plumbers Forums

Status
Not open for further replies.

giarc00007

Gas Engineer
Messages
305
just wondering if both these boilers fit existing jig and also flue terminal is in same position?
 
both fit the jig but only the gold has a off line flue like a duo,whats wrong with the duotec?

got called out today as had water coming out of bottom of boiler. primary heat exchanger had a crack which ive never seen before, water has knackered fan, board also water into gas valve. No service history on boiler commission sheet blank. customer cant remember who fit it. they want price on cheapest boiler. thats why thinking straight swap using existing jig
 
change it for another duo
 
£400 for main eco or something like that

with flue and clock if so thats a good deal (my prices to me normally about 499 and duo about 560-620 depending where i get it from)
 
so its only the gold that will line up with existing flue hole but jig fits all then?

no duo,plat,titanium,gold,promax all off center flues,main center flue,they all fit on the same jig,even jig from earlier 105/80 e/performa is the same
 
If you shop around and haggle with one of the big boys you can grab a duotec with flue kit (hor or vert) with quality big name mag clean and all chemicals for 575+V
 
Last edited by a moderator:
Main Eco's are good and cheap got one in my house but they are heavy so you need strong arms.
 
Plumb centre have a 24 kw duo tec erp for £750 inc VAT which comes with flue, a Magnaclean micro 2 or Fernox filter plus chemicals. Might be best getting a Potterton if they want cheap as chips though.
 
If you are nice to them you get that for £700 including hoz or vert flue. Mag filter and chemicals
 
Status
Not open for further replies.

Similar plumbing topics

Yeah DuoTec offset, it was the Eco Elite that...
Replies
7
Views
3K
Upto you the duo has a flow rate of 11 as the...
Replies
4
Views
2K
J
According to the manual it’s 5 & 6 for CH...
Replies
1
Views
572
Deleted member 120897
D
D
thanks again pork chop i will go for the 25kw...
Replies
24
Views
3K
Deleted member 131795
D
Diverter not leaking into the motor ?
Replies
1
Views
2K
Back
Top