Replacing Heat only boiler | Boilers | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

American Visitor?

Hey friend, we're detecting that you're an American visitor and want to thank you for coming to PlumbersTalk.net - Here is a link to the American Plumbing Forum. Though if you post in any other forum from your computer / phone it'll be marked with a little american flag so that other users can help from your neck of the woods. We hope this helps. And thanks once again.

Discuss Replacing Heat only boiler in the Boilers area at Plumbers Forums

Status
Not open for further replies.
E

EganPlumbing

Hi all,
I need to replace an Ideal mexico 65. Does 65 mean 65000 BTU's?
If so does that simply mean I could swap it for an equivalent KW boiler, what ever size that would be, I guess about 20kw-ish.
Thanks
 
Hi all,
I need to replace an Ideal mexico 65. Does 65 mean 65000 BTU's?
If so does that simply mean I could swap it for an equivalent KW boiler, what ever size that would be, I guess about 20kw-ish.
Thanks
Iam not sure about the 65 bit, but get your heating engineer to correctly size the boiler, some people seem to think bigger is better, a boiler that is too big wont run as it should do ,ie most efficiently.
 
Status
Not open for further replies.

Similar plumbing topics

200% won’t be the reason the cylinder isn’t...
Replies
10
Views
1K
Off the sound of it I would say 15/50. Not...
Replies
1
Views
887
You've already spent thousands on a new boiler...
Replies
2
Views
964
B
No the installers need to come out
Replies
10
Views
2K
Just to check the boiler dial is on hot water...
Replies
1
Views
1K
Back
Top