Request for DHW does not fire the boiler - | Boilers | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

American Visitor?

Hey friend, we're detecting that you're an American visitor and want to thank you for coming to PlumbersTalk.net - Here is a link to the American Plumbing Forum. Though if you post in any other forum from your computer / phone it'll be marked with a little american flag so that other users can help from your neck of the woods. We hope this helps. And thanks once again.

Discuss Request for DHW does not fire the boiler - in the Boilers area at Plumbers Forums

Status
Not open for further replies.
Messages
2
Hi,
I have a Ravenheat 100. CH works fine but when i turn on the hot tap the water runs cold for a very very long time before it heats up. It will also turn itself on and off again. It seems to be worse when the CH is turned off and better when the temp is turned up high.


The diverter valve is working fine and the flow control switch is aslo working. I have ordered a themistor sensor to replace the current one. After that I am not sure - any ideas.
 
firstly how have you checked that divertor and flow switch are operating correctly and secondly are you gas safe registered?
 
Hi not wanting to seem impertinent considering you have posted me a reply but the question you pose is actually in the body of my question. However i appreciate your taking the time to reply thank you.

And no I am not gas certified.
 
Status
Not open for further replies.

Similar plumbing topics

I don't believe moving the manual lever over...
Replies
5
Views
512
S
Boiler Fault I’m hoping someone can help with...
Replies
0
Views
131
S
    • Like
Great summary and well done for getting it...
Replies
1
Views
2K
Just happened to be rummaging around on the...
Replies
10
Views
3K
Back
Top