Resistance of an immersion heater | Plumbing Jobs | The Job-board | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Discuss Resistance of an immersion heater in the Plumbing Jobs | The Job-board area at Plumbers Forums

Status
Not open for further replies.
M

mountainman

In the case of this one, resistance was futile.
 

Attachments

  • uploadfromtaptalk1374845664298.jpg
    uploadfromtaptalk1374845664298.jpg
    24.6 KB · Views: 46
  • uploadfromtaptalk1374845684311.jpg
    uploadfromtaptalk1374845684311.jpg
    16.3 KB · Views: 48
Measure the resistance of a new one for future reference. Also get a cheap clip on ampmeter (ebay from hong kong i got mine all ok) and get reading on a new install. Makes fault finding easy on jobs.
 
Measure the resistance of a new one for future reference. Also get a cheap clip on ampmeter (ebay from hong kong i got mine all ok) and get reading on a new install. Makes fault finding easy on jobs.

I didn't mean electrical resistance :)
 
Measure the resistance of a new one for future reference. Also get a cheap clip on ampmeter (ebay from hong kong i got mine all ok) and get reading on a new install. Makes fault finding easy on jobs.

Fault finding on these is easy, if the fuse makes a lovely firework pattern it's fluxed!
 
A standard 3KW/240Vac immersion heater will pull about 12Amps & have about 19 Ohms resistance.
 
A standard 3KW/240Vac immersion heater will pull about 12Amps & have about 19 Ohms resistance.

Think Dickie needs to get the college books out.
240vx3000w not about 12ax19ohms but 12.5a x 19.2 ohms.

In the real world (not the class room) 230 volts is the norm for uk.

So looking at 13.04 amps X 17.63 ohms

Get it right before you post son. Get it right
 
Think Dickie needs to get the college books out.
240vx3000w not about 12ax19ohms but 12.5a x 19.2 ohms.

In the real world (not the class room) 230 volts is the norm for uk.

So looking at 13.04 amps X 17.63 ohms

Get it right before you post son. Get it right

Well done 'heliotrope' you can read. Unfortunately you missed the ABOUT dear boy.
The simple Ohms Law I learned 'on the job', not on any Mickey Mouse course.
However, thanks for pointing that out, but in the real world as you say, the readings only need to be stated as a rough figure.

Oh by the way, you have a photo of my dear auld mother as your avatar, can you please change it.
 
Last edited by a moderator:
Status
Not open for further replies.

Similar plumbing topics

  • Question
Just a thought but did you check the fuse box...
Replies
5
Views
505
  • Question
There's no leaks anywhere above it. The water...
Replies
3
Views
360
S
  • Article
Immersion fuse or MCB? An immersion heater...
Replies
0
Views
1K
Steve-S
S
  • Question
They are easy to find by Googling once you...
Replies
2
Views
662
  • Question
It looks like it has been leaking from within...
Replies
2
Views
448
Back
Top