L
Louis.
Been having problems with the grant combi boiler 21e locking down and the button on the control box needing to be pressed to fire up the boiler.
An engineer was called out and he said it was likely to be the photocell, which he cleaned which allowed it to work about an hour, then it locked out again. The solenoid was then replaced by us, with no change, and finally I fitted a new control box today as we were told this was the last possibility but still wont fire until pressed.
This was the one we purchased https://www.warmsafe-plumbing-and-h...duct&product_id=486&search=riello+control+box
However, there were 2 with the same code on the website and it seems this is the one we've been sent.
https://www.warmsafe-plumbing-and-h...roduct/product&product_id=367&search=3008652+
The codes are the same, however it was noted under the heating element symbol the new one had spade connectors, and that little loop connector.
However, the one we took off (the £34 one on warmsafe), does not have this little loop thing.
Is there a difference between these two control boxes? Will removing this little connector make it work or are they two completely different boxes?
Any helps greatly appreciated with it being close to christmas! Hope I've made sense,
Thanks,
Louis.
An engineer was called out and he said it was likely to be the photocell, which he cleaned which allowed it to work about an hour, then it locked out again. The solenoid was then replaced by us, with no change, and finally I fitted a new control box today as we were told this was the last possibility but still wont fire until pressed.
This was the one we purchased https://www.warmsafe-plumbing-and-h...duct&product_id=486&search=riello+control+box
However, there were 2 with the same code on the website and it seems this is the one we've been sent.
https://www.warmsafe-plumbing-and-h...roduct/product&product_id=367&search=3008652+
The codes are the same, however it was noted under the heating element symbol the new one had spade connectors, and that little loop connector.
However, the one we took off (the £34 one on warmsafe), does not have this little loop thing.
Is there a difference between these two control boxes? Will removing this little connector make it work or are they two completely different boxes?
Any helps greatly appreciated with it being close to christmas! Hope I've made sense,
Thanks,
Louis.