Rimless Toilet - Flush not reaching front of the bowl | Boilers | Plumbers Forums
  • Welcome to PlumbersTalk.net

    Welcome to Plumbers' Talk | The new domain for UKPF / Plumbers Forums. Login with your existing details they should all work fine. Please checkout the PT Updates Forum

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

American Visitor?

Hey friend, we're detecting that you're an American visitor and want to thank you for coming to PlumbersTalk.net - Here is a link to the American Plumbing Forum. Though if you post in any other forum from your computer / phone it'll be marked with a little american flag so that other users can help from your neck of the woods. We hope this helps. And thanks once again.

Discuss Rimless Toilet - Flush not reaching front of the bowl in the Boilers area at Plumbers Forums

Messages
2
Hello All,

I'm trying to install a rimless toilet and I just cannot get the flush to function as it should. Here's a video of what's going on - the water doesn't reach the front of the bowl.


I've raised the issues with the supplier and after sending videos and pictures of the set up, they sent me a new toilet... which still doesn't work!🤬

Here's my install (as you can tell i'm a DIYer! 😂). I've got the cistern as high as I can. I've even tried blocking the overflow pipe to try to get more water in the cistern. (The cistern / fill valve / flush valve all came as a package with the toilet)



IMG_20211002_093152.jpg
IMG_20210922_183945.jpg

IMG_20211002_093207.jpg
IMG_20211002_093201.jpg


And the flush valve is set up as shown below...

IMG_20211002_094906.jpg
IMG_20211002_094917.jpg


Does anybody have any idea as to what might be going on? Since neither of the toilets work I'm starting to think I've got something wrong with the install.

Andrew
 
Problem with rimless toilets is you need force atm you don’t have much because your flush pipe is so short in the 2” end and it’s a 90 d bend which isn’t helping swept would be better but still not great

So cistern needs to be higher maybe look at a different type ?
 
Is there much water left in the cistern after the flush?
That doesn't seem a full flush.

With the flush valve out, block the hole in the bottom of the cistern and let it fill to normal level, then let the water go.
 
Last edited:
Is there much water left in the cistern after the flush?
That doesn't seem a full flush.

With the flush valve out, block the hole in the bottom of the cistern and let it fill to normal level, then let the water go.

After the flush there's a couple of centimeters of water left.

I've tried letting it fill and then quickly pulling the flush valve out but that doesn't seem to make any difference.
 
There doesn't seem to be anything wrong with the install.
You would expect the flush to be better than that.

Contact the supplier and as for a refund and try a different brand pan & cistern.
 

Similar plumbing topics

I would cut it to the right size and glue the...
Replies
6
Views
1K
Was the new pan fitted with a flexible waste...
Replies
1
Views
616
Bit late to the party but I don't like the...
Replies
18
Views
7K
Thank for coming back. Really appreciate you...
Replies
2
Views
898
  • Question
If you mean the screw fitting that holds the...
Replies
2
Views
292
Back
Top