H
honeymonster
Hi there,
I have a pvc soil stack which unfortunately runs inside my house in a cavity wall. Currently the branch for the toilet waste comes out 90 degrees to the wall, under the floorboards and through a hole in the floor for an old style vertical waste toilet.
I need to rotate the toilet part on the stack 90 degrees so that it runs parallel to the wall (so i can feed it along the inside of the cavity wall and then run it horizontally through a hole in the wall) allowing me to fit a new toilet close to the wall.
I hope I've explained this well enough. What I need to know is, can I just rotate this part of the stack? Or am I going to need to buy a new part/reseal it etc etc?
thanks in advance
I have a pvc soil stack which unfortunately runs inside my house in a cavity wall. Currently the branch for the toilet waste comes out 90 degrees to the wall, under the floorboards and through a hole in the floor for an old style vertical waste toilet.
I need to rotate the toilet part on the stack 90 degrees so that it runs parallel to the wall (so i can feed it along the inside of the cavity wall and then run it horizontally through a hole in the wall) allowing me to fit a new toilet close to the wall.
I hope I've explained this well enough. What I need to know is, can I just rotate this part of the stack? Or am I going to need to buy a new part/reseal it etc etc?
thanks in advance