Routine service discovery. | Plumbers Arms | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Discuss Routine service discovery. in the Plumbers Arms area at Plumbers Forums

king of pipes

Esteemed
Plumber
Gas Engineer
Subscribed
Messages
6,156
Carried out a routine service on a Valliant 637 fitted by me some 12 years ago now , replaced heat ex insulation £47.50 + vat I thought was a bit expensive ? all was ok till I checked the combustion air intake and found similar readings to in the main flue so meant a strip down and a ring round to source parts luckily got what I needed and got it sorted 4 hrs I hadn't accounted for Grrrrrr. Regards Kop
 

Attachments

  • IMG_20221108_110713420_MFNR.jpg
    IMG_20221108_110713420_MFNR.jpg
    119.1 KB · Views: 22
  • IMG_20221108_131712030_MFNR.jpg
    IMG_20221108_131712030_MFNR.jpg
    359 KB · Views: 21
  • IMG_20221108_133036605_MFNR.jpg
    IMG_20221108_133036605_MFNR.jpg
    346.4 KB · Views: 21
  • IMG_20221108_133049704_MFNR.jpg
    IMG_20221108_133049704_MFNR.jpg
    344.9 KB · Views: 19
  • IMG_20221108_133206355_MFNR.jpg
    IMG_20221108_133206355_MFNR.jpg
    394.4 KB · Views: 18
  • IMG_20221108_105626528.jpg
    IMG_20221108_105626528.jpg
    369.1 KB · Views: 20
  • IMG_20221108_105615557_MFNR.jpg
    IMG_20221108_105615557_MFNR.jpg
    248.5 KB · Views: 19
  • Screenshot_20221110-221116.png
    Screenshot_20221110-221116.png
    1 MB · Views: 21
Correct mate I changed the one off the boiler , one in the elbow and a length of flue seals were shot 👍😉 liking the new identity. Regards kop
I’ve had to change some, but sometimes struggle getting he elbow off the turret, or back on. Have damaged a couple of the rivets where they join the plastic. Luckily for me being social housing it’s not bad.
 
I’ve had to change some, but sometimes struggle getting he elbow off the turret, or back on. Have damaged a couple of the rivets where they join the plastic. Luckily for me being social housing it’s not bad
Next time remove the screws out of the turret section and lift it up you will find it's easier, remove the elbow still connected to the turret section. 😉👍
 

Similar plumbing topics

M
  • Locked
If you do loads they provide you with a...
Replies
9
Views
209
Mike Jackson
M
O
  • Locked
I am updating threads. If this is not current...
2
Replies
39
Views
15K
M
    • Like
  • Locked
Hahaha i remember something about 200ppm but...
2
Replies
31
Views
1K
Whyme
W
P
    • Like
  • Locked
Hope to be living the French way next year!
Replies
11
Views
20K
Back
Top