Rubi electric tile cutter | Plumbing Jobs | The Job-board | Plumbers Forums
  • Welcome to PlumbersTalk.net

    Welcome to Plumbers' Talk | The new domain for UKPF / Plumbers Forums. Login with your existing details they should all work fine. Please checkout the PT Updates Forum

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

American Visitor?

Hey friend, we're detecting that you're an American visitor and want to thank you for coming to PlumbersTalk.net - Here is a link to the American Plumbing Forum. Though if you post in any other forum from your computer / phone it'll be marked with a little american flag so that other users can help from your neck of the woods. We hope this helps. And thanks once again.

Discuss Rubi electric tile cutter in the Plumbing Jobs | The Job-board area at Plumbers Forums

Status
Not open for further replies.

Phil

Plumbers Arms member
Plumber
Messages
4,236
Rubi DU-200L-BL Wet Saw / Tile Cutter (select voltage) £0.00 in stock - next day UK delivery

How many of you have this type of cutter? I need to upgrade from my £40 DIY wetwheel cutter but I'm worried about the size of this cutter in a bathroom.

The guys that have them (destroyer, BOD, TB services etc...) where do you have it in an average postage stamp size bathroom or is it on the landing?

I'd hate to buy it and then never use it as there's no where to put it. Also does this kind spray water everywhere?
 
if i have large format to cut which doesn't fit in my manual cutter i use my 4 1/2" disk cutter with a steady hand outside.
 
Don't use mine that often mate when I do normally outside in the customers back garden and throw a tarp over it at night, then to use a grinder a lot of the time
 
Plus there is some spray from it used it indoors before when I tiled a new ensuite in a extension and put the tarp on the floor in the room to contain the spray
 
I usually have the wet cutter setup outside or in the back of the van and keep my manual cutter with me I have a ts40 and a ts60 so 99% of cuts can be done with them and I just use the electric for L shapes
 
Status
Not open for further replies.
Back
Top