Salamander RHP 45 service kit? Will the CT fit? | UK Plumbers Forums | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Salamander RHP 45 service kit? Will the CT fit?

Post thread
Post reply

Discuss Salamander RHP 45 service kit? Will the CT fit? in the UK Plumbers Forums area at Plumbers Forums

Marti

Marti

Messages
12
G'd Afternoon,

I've got a Salamander RHP45 that's gone incontinent with old age!
The top, anti-vibration hose leaks and appears to be a standard part. A bigger problem is around the aluminium pump housing (image attached) Would anyone know if the O-Ring kit Salamander sell for the CT range will fit? Or, if there is a standard, off-the-shelf O-Ring that'll fit?

Can't really complain if it is completely beyond repair; just unfortunate timing work-wise.
Your opinions appreciated.
 

Attachments

  • 20200621_225933.jpg
    20200621_225933.jpg
    146.4 KB · Views: 27
Sort by date Sort by votes
Hello, the hoses are available on our spares shop, although when you mention that its leaking around the aluminium housing, this can be down to a shaft seal leak (shaft seals are no longer available as a spare), or if its on the plastic pump end an o-ring can be purchased from our spares shop, although be mindful it’s not a guaranteed fix.

If you were to replace the pump, the closest match is now the RP50PT but would advice altering the pipework so that the angled inlet hoses are on the inlets to the pump, with the straight hoses being on the outlets. Thanks
 
Upvote 0 Downvote
Back
Top