Seeking advice on my expansion vessel | Central Heating Forum | Plumbers Forums
  • Welcome to PlumbersTalk.net

    Welcome to Plumbers' Talk | The new domain for UKPF / Plumbers Forums. Login with your existing details they should all work fine. Please checkout the PT Updates Forum

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

American Visitor?

Hey friend, we're detecting that you're an American visitor and want to thank you for coming to PlumbersTalk.net - Here is a link to the American Plumbing Forum. Though if you post in any other forum from your computer / phone it'll be marked with a little american flag so that other users can help from your neck of the woods. We hope this helps. And thanks once again.

Discuss Seeking advice on my expansion vessel in the Central Heating Forum area at Plumbers Forums

Status
Not open for further replies.
N

Nicks

I have a Vitodens 100-W WB1B 26 kw system boiler. Which I believe needs a new expansion vessel, due to when I tried checking the pressure in this vessel, I had water spray out from the valve ..... Am I right that a split may have occurred ?
If so, is it a simple job to exchange new for old vessels over ???
As my friendly plumber at present is on his holiday :sunny:
 
sorry to say if the expansion vessel is located in the boiler you need to be gas safe to change/ take the case off the boiler so no
 
Thanks Shauncorbs.

I just believed it may have been a simple job, alls still working ..... but I wanted to understand if there may be damage being caused at present ........ not realising I would be tampering with the gas.

I will shall await my friends return in three weeks time then :-(

Thanks again
 
Nick , it could be a quick job but , even if you dont touch the gas it is illegal to take the case off .
 
Nick, to clarify, as my esteemed colleague's have mentioned removal of the case may well form an integral seal on the boiler which is obviously there for your safety. If you take it apart you won't have the tools or the know-how to test this has been put back properly
 
Last edited:
Up to my plumbers tan recovery, in three weeks time I guess then .... Riley
 
As a temporary fix isolate and drain out a rad then open the valves again as this will act as an expansion vessel for a few weeks.
 
Thanks Duncan but I've ordered the replacement expansion vessel, as written in the Vitodens parts list manual (014).

Just have to wait for Suntan man :) to return in 20 days. With a radiator now acting as the expansion vessel for the time being.
 
Status
Not open for further replies.

Similar plumbing topics

B
Context for issue: I'd like to start by...
Replies
0
Views
561
Butchy10
B
A resume of the outcome would be polite...Rob...
Replies
7
Views
7K
    • Like
I am same as the above posts, I have the...
Replies
20
Views
3K
Back
Top