A
Aire
Hi guys, got to service the above boiler soon and as I haven't done one before just thought I'd ask a few questions.
Regarding removing the fan, I have to remove the silicone tubes from the aps, do these need replacing or do they generally keep in good condition.
Says to check the rope seal, I have some spare stuff in the van if it needs replacing but it's not sticky, what do you use as an adhesive?
And the heat insulation pads, do they fall to bits when you touch them or should they come out and go back in with no problems.
I know you can't say for sure but just wondering, generally, are they trouble free when servicing?
Thanks
Regarding removing the fan, I have to remove the silicone tubes from the aps, do these need replacing or do they generally keep in good condition.
Says to check the rope seal, I have some spare stuff in the van if it needs replacing but it's not sticky, what do you use as an adhesive?
And the heat insulation pads, do they fall to bits when you touch them or should they come out and go back in with no problems.
I know you can't say for sure but just wondering, generally, are they trouble free when servicing?
Thanks