Shower help /suggesion

[justlead1]

Hi. Just fitted a grohe bath/shower mixer at one of the nippers flat. I have had the mixer kicking about for 12 years or more. Went to fit a shower hose and rose, only to find the male chrome thread on the mixer is 3/4". I am having trouble finding a hose with a 3/4" connector. A chrome 3/4" female to 1/2" male converter is also elusive. Shes getting the hump with the W/machine hose i fitted, and asks me every day "have you got it yet" Any advise would be welcome as i live in the country.

 

[easyt]

Have you contacted the manufacturer. Ist option I would suggest.

 

[WHPES]

You could always use a brass 1/2" x 3/4" but it won't look too pretty!

 

[easyt]

You can get a 3/4 *1/2 inch BSP reducing bush in chrome used to connect 15mm pipe to some towel rails etc. Not sure how to post image.

Image attempt [DLMURL]http://www.NoLinkingToThis/sfd/i/cat/07/p1473107_l.jpg[/DLMURL]

Oops. Sorry. You said Male !

Here's one on this site. 2 quid. Choiceful.com: Online Shopping for Home and Garden, Kitchen and Cookware, Outdoor Leisure, Building and DIY & more

 

[justlead1]

Hi Thank very much for help. I thought i cracked it, once i posted the question. By screwing a chrome rad valve union on. But the fitting suggested by Easyt is just the job. Thanks again.