Shower overspill bath fitted wrong way around

[Allegra]

Taps are at one end shower at the other so when someone showers the water hits the wall and overspills at the shower end as no drain as part of the bath tenants are using towels then hanging out I have tried using special rubber blockers but they are straight and the end of the bath is curvec any constructive ideas or how much it should coat to lengthen piping to water supply so bath is put back in correct position.

replies to meiaca at aol dot com based in exeter devon

thanks

Meia

 

[village idiot]

Is there any chance you can register with the Forum as opposed to being a ''Guest''?

 

[Allegra]

done.

 

[Riley]

Simple answer would be do it properly. But a few pictures might help us to offer ideas

 

[Unregistered]

I bought the house with the bathroom already fitted so i didnt fit it and yes of course obvious to do it properly photos i will have a look and see if i have any....but the bath has a high neck rest so water hits tiles and gathers at shower end not tap end where the soap indents either side would drain water away....

 

[Riley]

Hey bud I'm just saying I'm not having a go. Anything else is really a bodge is all I'm saying