Shower pump | Showers and Wetrooms Advice | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Discuss Shower pump in the Showers and Wetrooms Advice area at Plumbers Forums

O

Old Account

Hello all ,


I had had an issue today I came across a shower pump I haven't seen before.

The Stuart turner 1.5 bar single hot water ,

located 1st floor next to the cylinder / feeds only 1 wash basin upstairs 2nd floor

customer said pump is not working anymore it used to work great then it started intermittent now it completely stopped


the Stuart turner single pump has also a Stuart turner control module installed therefore I have never seen it before and didn't really know what's the issue.

Before re I give a price to replace the pump I would like to try to find out what's the issue.

this module helps the pump from running dry and any sort of restriction it would shut the pump down straight away so the pump wouldn't get damaged.




now is your turn does anybody know what it could be ?

The module didn't show any light on those 3 lamps I assume I could do a restart but what caused the module to lock out ?



Atched you will find the module


[video]http://www.pumpserviceltd.com/stuart-turner-commercial-pumps/control-module/control-module-41011/prod_424.html[/video]
 

Similar plumbing topics

  • Question
Hi SI......is the shower on the same floor as...
Replies
12
Views
366
  • Question
Another vote for negative pump.
Replies
11
Views
3K
  • Question
If the hot water tap(s) (post #7) can...
Replies
18
Views
2K
  • Question
Should work. It's not on the floor, but at...
Replies
1
Views
1K
  • Question
Thanks for asking Lou. After taking 30+...
Replies
2
Views
592
Back
Top