Shower tower panels | Showers and Wetrooms Advice | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Discuss Shower tower panels in the Showers and Wetrooms Advice area at Plumbers Forums

U

Unregistered

Hi I am thinking of purchasing a shower tower panel with jets from china the Min operating pressure is 4kg/4bar/0.4mpa and the maximum operating pressure is 10kg/10bar/1mpa which system would this work with? will it work with a combi boiler
 
Yes for about 5 mins then, as it's made in China, it will leak/break and you'll be back on here asking if anyone knows where to get parts from
And you will need to register as per forum rules to get any replies
 
Upvote 0
Almost always rubbish. Customer supplied and we fitted one in a very expensive wetroom. Had to cut it out after three weeks when it leaked like a sieve.

Buy cheap, buy twice.
 
Upvote 0

Similar plumbing topics

  • Question
Why does it matter if you’ve now removed it...
Replies
2
Views
755
  • Question
Cheers fowlerboi, I think this is the easiest...
Replies
4
Views
790
  • Question
Is there a stop that prevents the spindle...
Replies
8
Views
511
  • Question
As an update, what I did was: Applied a blob...
Replies
4
Views
893
A
  • Question
If not the above then possibility that the...
Replies
3
Views
802
Back
Top