- Messages
- 4,106
Hi Friends
I fitted a Siamp Optiva flush valve today. Just the top part as the bottom was fitted and the broken one twisted out.
There's a small issue that you may be able to advise on.
When you flush and the centre part lifts, it doesn't always go all the way down again so when the toilet fills it doesn't overflow but water just goes straight into the pan.
While I was there I tested it at least a dozen times and at the end it worked but alas the phone has rung and it now won't flush again.
Any ideas as I can't seem to adjust it and it just catches.
Thanks
Rct
I fitted a Siamp Optiva flush valve today. Just the top part as the bottom was fitted and the broken one twisted out.
There's a small issue that you may be able to advise on.
When you flush and the centre part lifts, it doesn't always go all the way down again so when the toilet fills it doesn't overflow but water just goes straight into the pan.
While I was there I tested it at least a dozen times and at the end it worked but alas the phone has rung and it now won't flush again.
Any ideas as I can't seem to adjust it and it just catches.
Thanks
Rct