Sink overflow problem

[Hodor]

I recently had a new Reginox 1.5 bowl sink installed. The sink is approx 18cms deep but unfortunately the overflow is positioned just over 10cms from the bottom which means I can't fill the sink much more than half. I contacted Reginox to ask whether there was any way of blocking off the overflow which I don't actually want anyway but they were less than helpful. So I was wondering whether anyone could suggest how I might block it off without going to great lengths. Any constructive help much appreciated.

 

[Rob Foster]

Plenty of Sanitary products on the market in the Uk in this particular area
via the internet etc , discount bathroom places and also high end stuff esp Italy designer stuff are often not fit for purpose and do not meet and
never will would never meet standard regulations, if ever they are imposed anymore.
its basically the wild west now
compared to only a few years ago
centralheatking

 

[WC1]

Be aware, doing this is not advisable.
You will greatly increase the chance of having a leak/flood either through overflowing or leaking around the blanking plug.
Shop around for "sink blanking plug"
like : White Ceramic Sink Tap Hole Stopper Blanking Plug Cover Disc | eBay
Stick on with CT1 or silicone if you can't get round the back/side

 

[Rob Foster]

I recently had a new Reginox 1.5 bowl sink installed. The sink is approx 18cms deep but unfortunately the overflow is positioned just over 10cms from the bottom which means I can't fill the sink much more than half. I contacted Reginox to ask whether there was any way of blocking off the overflow which I don't actually want anyway but they were less than helpful. So I was wondering whether anyone could suggest how I might block it off without going to great lengths. Any constructive help much appreciated.View attachment 38485

Just find a suitable plug , rubber or plastic shave it all round, get some clear sillycone
apply liberally , stick it in the offending hole , wipe off the excess , job done. Its no good really because the sink might overflow ...its up to you...total cost peanuts
Rob Foster,
...aka centrakheatking

 

[Hodor]

Its no good really because the sink might overflow

My previous kitchen sink was in use for well over 30 years, had no overflow fitted but there were never any floods. Besides, the sink has a second smaller bowl which would act as an overflow if I should be daft enough to leave the taps running unattended and go out of the kitchen for an extended period of time.

 

[WC1]

No worries, we're not having a go. You might also look at a blanking plug for a cistern, prob a bit smaller than 1 for a tap hole, available in plastic and trim down as rob says. Happy days

 

[Ben-gee]

I have never seen a kitchen sink overflow that can keep up with the mains on a fully open tap anyway. So in practice they just give you a bit more time before flooding - not much use.

 

[PETE 123]

Big washing up bowl.