sit gas valve | Gas Engineers Forum | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Discuss sit gas valve in the Gas Engineers Forum area at Plumbers Forums

Status
Not open for further replies.

ambrosia

Plumbers Arms member
Plumber
Gas Engineer
Messages
890
could anyone tell me resistance values for sit gas valve from a turbo max 242/2-5 r1

its too late to ring vaillant and i need to know before 7am tomorrow

Just had a nightmare tenant who phoned to say no hot water, however when i arrived couldnt find anything wrong

asked the tenant had you been using it when it stopped working, no woke up this morning and it wasnt working, asked if he could hear anything when it happened, said he could hear it clicking and trying to light.
Later he said it had actually happened after he was in the shower nowhere near the boiler and that he'd been showering for about half an hour.
He then said he has to reset the boiler everytime it happens to get it working again. That the display only had numbers so i dont even know if it had locked out. He then said its the 1st time its happened and thought red light was on.
How are you suposed to fix that
 
Status
Not open for further replies.

Similar plumbing topics

You could try greasing the spindle of the gas...
Replies
1
Views
608
Thanks so much guys, i appreciate ur advice...
Replies
12
Views
1K
Nedis Plug-In LPG, Natural Gas and Coal Gas...
Replies
10
Views
1K
If you put your hand hand on the case does it...
Replies
9
Views
1K
Hi Willum, Gas Rating calc. Ensure no other...
Replies
6
Views
2K
Back
Top