Sizing Heat Sink radiator for wet hetas install | Oil and Solid Fuel Forum | Plumbers Forums
  • Welcome to PlumbersTalk.net

    Welcome to Plumbers' Talk | The new domain for UKPF / Plumbers Forums. Login with your existing details they should all work fine. Please checkout the PT Updates Forum

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

American Visitor?

Hey friend, we're detecting that you're an American visitor and want to thank you for coming to PlumbersTalk.net - Here is a link to the American Plumbing Forum. Though if you post in any other forum from your computer / phone it'll be marked with a little american flag so that other users can help from your neck of the woods. We hope this helps. And thanks once again.

Discuss Sizing Heat Sink radiator for wet hetas install in the Oil and Solid Fuel Forum area at Plumbers Forums

G

G-laaar

Hi - I've had some conflicting advice so looking for confirmation please - what size should a heat sink radiator for a log burner/boiler be? I've been told by one installer 10% of output to water and another 20%. I can;t find aything in building regs and can;t find a HETAS document with that info included so a poitn in the right direction so I can challenge with confidence would be great please.
 

Similar plumbing topics

  • Question
The reseller ignores UK regulations about...
Replies
16
Views
1K
Have you got a photo of the sink at the...
Replies
2
Views
544
O
Have you tried waggling the pin on the trv...
Replies
1
Views
908
S
  • Question
its a real p poor install. the suspended part...
Replies
5
Views
1K
  • Question
Yes you can. G3 is only with regards to the...
Replies
1
Views
779
Back
Top