- Messages
- 8,627
Guys, this is following on from my showerdoc rant, this is the reason I tried to use them .......
customer has one of them horrible cheap and nasty chinese pod type showers.
It has 3 valves, on \ off, thermostatic control and a diverter( to go from the body jets to shower hose)
He wants to keep the shower pod thing so my cunning plan is to ditch the diverter, and fit a small
thermostatic valve incorporating flow control
the problem is it has to go through a hole of about 70 mm in the 8 ish mm shower acrylic wall. The valve can battened out slightly to replicate a thin wall.
I have never seen a valve so small, has any of you guys ???
thank you.
customer has one of them horrible cheap and nasty chinese pod type showers.
It has 3 valves, on \ off, thermostatic control and a diverter( to go from the body jets to shower hose)
He wants to keep the shower pod thing so my cunning plan is to ditch the diverter, and fit a small
thermostatic valve incorporating flow control
the problem is it has to go through a hole of about 70 mm in the 8 ish mm shower acrylic wall. The valve can battened out slightly to replicate a thin wall.
I have never seen a valve so small, has any of you guys ???
thank you.
