soill pipe collar

[desrob]

i have got a seperate cistern and pot connected by a flush pipe,i cannot change it to close coupled as the soil pipe connection is too far of the wall,were the pan connector connects to the soil pipe there is a big fat ugly pot collar, my question is can i cut this off,at ground level and what would i use to do that , i 've seen something similar done before and the soil pipe left is not circular more oval,will i be able to get a good seal or is there something out there to allow for this.thanks

 

[stevetheplumber]

cut it back flush to wall with 9 inch grinder and connect with a multiquick/pancon

 

[desrob]

you mean floor? thank's steve

 

[tamz]

Are you on about an S trap or P trap?

Either way and whatever it is made of you can cut the collar off with a stihl saw or grinder and join to it with an extension multiqwik.

 

[desrob]

s trap, p trap, toilet or soil pipe? toilet double siphonic soil pipe underground can not see it?

 

[REDSAW]

just put up a stud/dummy wall and build of 4'' to compensate it your up for it?.