R
Riverside
Hello all, I've searched the threads and can't find the exact answers to my questions but I may be asking the wrong questions. My pal is having some heating issues.
1. Bottle type air vent.
Should the black knurled nut on the top of the vent body be left cracked open or shut tight after manual bleed of air.
The vent is sited vertically on a 200mm leg of pipe.
2. pump placement.
Is it permissible to place a pump on the return line of a open vented system, the last fitting before the pump is the hot cylinder return. The system is 10 years old.
3. System blockage.
Two rads on their own leg of system, fully bled and pump on high speed hot on top but cold on bottom. I suspect sludge from iron system piping and no history of inhibitor according to my pal.
4. Oil boiler on kitchen floor.
Is it legal to place a oil fired boiler in a domestic kitchen flue exits through old chimney.
Many thanks to anyone who takes the time to help.
1. Bottle type air vent.
Should the black knurled nut on the top of the vent body be left cracked open or shut tight after manual bleed of air.
The vent is sited vertically on a 200mm leg of pipe.
2. pump placement.
Is it permissible to place a pump on the return line of a open vented system, the last fitting before the pump is the hot cylinder return. The system is 10 years old.
3. System blockage.
Two rads on their own leg of system, fully bled and pump on high speed hot on top but cold on bottom. I suspect sludge from iron system piping and no history of inhibitor according to my pal.
4. Oil boiler on kitchen floor.
Is it legal to place a oil fired boiler in a domestic kitchen flue exits through old chimney.
Many thanks to anyone who takes the time to help.