Space required for Megaflo + boiler

[Rusty James]

HI,

Could someone tell me what would be the minimum cupboard space required to fit a cylinder unvented/Indirect (210) and a boiler?

- 4 bedrooms house 2 bathrooms

I've checked the manufacture website for sizes but it's doesn't take into account the pipe work needed.

Thanks

 

[woodytheplumber]

if at all possible get the plumber to install all the system as neatly as possible then build cupboard around it following maufactuers spec for clearences

 

[Howsie]

Only your plumber will be able to tell you that based on the pipe runs etc.

 

[SimonG]

Depends on the size of your plumber Seriously though don't try and cram it all in, a good engineer is what you need as you'll have to allow for servicing and replacement. The manufacturers clearances are only one part of the story.

 

[Rusty James]

I guess I will have to see with the plumber if it will be able to fit the all thing in the cupboard I have in mind.

Cheers

 

[stevetheplumber]

its going to depend on the size of the cylinder boiler and ceiling hieght as to wether you can mount the boiler above the cylinder if you can youlll only need the width of the cylinder as all the pipe work can be in front